Programming Kitchen Receipts - Olympia CM 940-F Operating And Programming Manual

6.26

Programming kitchen receipts

Orders can be transferred directly to the kitchen and printed on an external kitchen printer as kitchen receipts.
There are 8 different printout versions of kitchen receipts
receipts and single receipts
setting is for the respective version number (KD#)
A kitchen printer can be programmed instead of the version number, e.g. to specify the section within the kitchen in which
the food was prepared (cold food, hot food, salads, etc.).
Up to 8 kitchen printer receipts can be programmed, each with a maximum of 18 characters.
"Salads" should be programmed instead of KD#6.
Example:
1. Set the key to PRG.
2. Select programme number 43
(see Chapter 6.1.2).
Press the ┣CASH┫ key to confirm
3.
the selection.
Use the ┣CASH┫ key to select the
4.
required memory location (1 to
8).
Use the ┣↑┫ and ┣↓┫ keys to
5.
move to the [ ] Name input area.
Press the ┣CASH┫ key to confirm
6.
the selection.
7. Enter the required kitchen receipt
message (max. 18 characters)
(see Chapter 6.2).
Press the ┣CASH┫ key to confirm
8.
the input.
Note:
9. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
and which are transferred to a kitchen
to be printed at the top of the kitchen receipt.
The [ ] COM-PORT No.
area is reserved and
cannot be programmed
with this cash register
model.
(see Chapter 6.5.1.8) which combine the printing of order
printer. With regard to these 8 versions, the default
Input
5x
Procedure,
see Chapter 6.2
Page 97 Specifications subject to change without notice!
Display
KITCHENPRINTER
[
[ ] COM-PORT No.
KITCHENPRINTER
[
[ ] COM-PORT No.
[
Salads
[Salads
1- 1
]name
6- 1
]name
]name
]name