Department Programming - Olympia CM 940-F Operating And Programming Manual

6.4.2

Department programming

1. Set the key to PRG.
2. Select programme number 01 (see Chapter 6.1.2).
Press the ┣CASH┫ key to confirm the selection.
3.
Programming department name (option):
Use the ┣↑┫ and ┣↓┫ keys to move to the input area for the department name.
4.
Press the ┣CASH┫ key to confirm the selection.
5.
Delete the old department name by pressing the ┣CLR┫ key.
6.
Enter the required text (max. 18 characters) (see Chapter 6.2).
Save each letter after entry by pressing the ┣CASH┫ key!
Press the ┣CASH┫ key to confirm the input.
7.
Programming department fixed price 1 (option):
Use the ┣↑┫ and ┣↓┫ keys to move to the input area for department fixed price 1.
8.
9. Enter the fixed price 1 (including decimal places and decimal point).
10. Press the ┣CASH┫ key to confirm the input.
The cash register automatically switches to the next programming step.
Programming department fixed price -2 (option):
11. Enter fixed price 2 (including decimal places and decimal point).
12. Press the ┣CASH┫ key to confirm the input.
The cash register automatically switches to the next programming step.
Assigning tax rates:
13. Enter the tax rate group.
14. Press the ┣CASH┫ key to confirm the input.
The cash register automatically switches to the next programming step.
Defining department status:
15. Enter the DP status number.
16. Press the ┣CASH┫ key to confirm the input.
The cash register automatically saves the entire programmed data.
Saving the programmed department :
17. Press the ┣CASH┫ key to confirm the selection.
Saving the programming in the memory is confirmed in the display. The system is now at the beginning
●
of the next department. Further data can now be programmed.
Tip:
18. Conclude programming the departments by pressing the ┣SUB-TOTAL┫ key.
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
Programme all the departments directly one after the other!
Page 40 Specifications subject to change without notice!