Navigating In The Plus; Deleting A Plu - Olympia CM 940-F Operating And Programming Manual

- Continued -
Programming the code for order type or printing on kitchen
printer:
Entering the inventory (stock):
Saving and ending programming the PLU:
6.5.3

Navigating in the PLUs

Use the ┣↑┫ and ┣↓┫ keys to move to the top line and then press the ┣CASH┫ key several times to switch between the
●
PLU memory locations.
By pressing the ┣DP-SHIFT┫ key, you can access the same position in the next PLU.
●
6.5.4

Deleting a PLU

1. Set the key to PRG.
2. Select programme number 03 (refer to Chapter 6.1.2).
Press the ┣CASH┫ key to confirm the selection.
3.
Use the ┣↑┫ and ┣↓┫ keys to move to the input area for the PLU number.
4.
5. Enter the number of the PLU to be deleted.
Use the ┣↑┫ and ┣↓┫ keys to select DELETE...
6.
Press the ┣CASH┫ key to confirm the selection.
7.
Continue the deleting process by pressing the ┣CASH┫ key or cancel the process by pressing the
8.
┣SUB-TOTAL┫ key.
●
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
Page 52
00
10
0
100
SAVE...
DELETE
Specifications subject to change without notice!
ORDER # / KD#
ORDER # / KD#
STOCK
STOCK