Programming The Training Pass Code Using The Pc - Olympia CM 940-F Operating And Programming Manual

Cash Register CM 940-F / 941-F / 942-F
6.13.1

Programming the training pass code using the PC

In order to programme a Training pass code using the PC programme, OLYMPIA ECR System provides the following
input mask. It is used to programme various parameter settings. They way to use the mask is described in Chapter 5, in
detail in Chapter 5.5.
Fig. 20
Important: *** After data has been transferred to the cash register, the software requires it is switched off briefly! ***
Olympia 2011 Page 72 Specifications subject to change without notice!