Programming Clerk Plus - Olympia CM 940-F Operating And Programming Manual

6.19

Programming clerk PLUs

A maximum of 60 clerk PLUs can be programmed.
Clerk PLUs are PLUs which have already been programmed (see Chapter 6.5) whose sale/revenue is automatically
saved in the system for all clerks and printed later in a X/Z clerk PLU report when the PLU has been defined as a clerk
PLU beforehand. This provides a quick view as to which clerks have sold more or less of an item compared to other
clerks.
PLU no. 22 should be defined as a clerk PLU. This programming should be assigned to memory location 3.
Example:
1. Set the key to PRG.
2. Select programme number 20
(see Chapter 6.1.2).
Press the ┣CASH┫ key to confirm
3.
the selection.
The first clerk appears in the display.
If necessary, use the ┣CASH┫ key
4.
to select the required memory
location (1 to 60).
Use the ┣↑┫ and ┣↓┫ keys to
5.
move to the [ ] PLU input area.
6. Use the numeric keyboard to
enter the PLU number, e.g. 22.
Press the ┣CASH┫ key to confirm
7.
the input.
8. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
Page 85
Input
2x
Specifications subject to change without notice!
Display
CLERK –PLU 1
[
CLERK –PLU 3
[
[
[ 22]PLU
[ 22]PLU
0
]PLU
0
]PLU
]PLU