Programming Additional (Cooking) Messages - Olympia CM 940-F Operating And Programming Manual

6.24

Programming additional (cooking) messages

Cooking messages relate to additional information for the kitchen, e.g., how a steak should be prepared: rare, medium,
well-done etc. or whether a meal should be served with or without a side salad.
Up to 30 cooking messages can be programmed, each with a maximum of 18 characters.
Cooking messages "rare", "medium" and "well done" should be assigned to memory locations 11 to 13.
Example:
1. Set the key to PRG
2. Select programme number 40
(see Chapter 6.1.2).
Press the ┣CASH┫ key to confirm
3.
the selection.
Use the ┣CASH┫ key to change
4.
memory locations for the cooking
message.
Use the ┣↑┫ and ┣↓┫ keys to
5.
move to the [ ] Name input area.
Press the ┣CASH┫ key to confirm
6.
the input.
7. Enter the cooking message.
Press the ┣CASH┫ key to confirm
8.
the input.
Use the ┣CASH┫ key to change
9.
memory locations for the next
cooking message.
10. Repeat steps 5 to 9 until you
have programmed all the cooking
messages required.
11. End programming by pressing
the ┣SUB-TOTAL┫ key.
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
10x
refer to Chapter 6.2
Page 93
Input
Procedure
Specifications subject to change without notice!
Display
cooking msg 00 10 1
[
cooking msg 00 10 1
[
[
cooking msg 00 20 1
[
]name
]name
]name
]name