Programming The Keys - Olympia CM 940-F Operating And Programming Manual

6.28.2

Programming the keys

The "Training" function (code number 34) should be assigned to the key currently assigned the "Print Size"
Example:
function (code number 64).
1. Set the key to PRG.
2. Select programme number 45
(see Chapter 6.1.2).
Press the ┣CASH┫ key to confirm
3.
the selection.
If you want to programme a PLU key:
Press the ┣CASH┫ key again.
4.
Note:
Use the ┣↑┫ and ┣↓┫ keys to
5.
move to the [ ] VALUE CODE
input area.
6. Use the digit keys to enter the
code number of the required
function, e.g. 34 (Training).
Press the ┣CASH┫ key to confirm
7.
the input.
The display switches to the next input
area, [ ] KEY BE ASSIGNED.
Press the ┣CASH┫ key.
8.
9. Now press the key to be as-
signed the new function. The
display shows:
The [ ] KEY BE ASSIGNED field
displays the internal key code to
which the function has been assigned.
10. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
Please create a suitable key label for the reprogrammed key so that other clerks clearly know what function
Note:
is assigned to the key!
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
Press the ┣CASH┫ key to
toggle between the
programming of function
and PLU keys.
Input
Page 101 Specifications subject to change without notice!
Display
=KEY-FUNCTION
[ 0] VALUE CODE
[ 0] KEY BE ASSIGNED
INIT DEFAULT KEYBD.
=KEY-PLU
[ 0] VALUE CODE
[ 0] KEY BE ASSIGNED
INIT DEFAULT KEYBD.
[ 0] VALUE CODE
[ 34] VALUE CODE
[ 0] KEY BE ASSIGNED
Pls Input
Redefine Key
Save...!!
Please Continue...
[ 34] VALUE CODE
[391] KEY BE ASSIGNED
1=
1=