Operation; Clearing Error Messages - Olympia CM 940-F Operating And Programming Manual

7

Operation

The cash register must be set to Registration mode, REG, in order to operate it.
Set the key to REG
Note:
The following applies for the following subsections:
the cash register is always programmed to 2 decimal places (default setting) and
●
the input examples normally depict keys on a raised keyboard (for corresponding keys on the flat keyboard, see
●
Chapter 4.3).
7.1

Clearing error messages

In the case of input errors or exceeding limit values, the cash register indicates an error status: An acoustic signal is
issued and an "E" (Error) appears in the display. Press the ┣CLR┫ key to clear the error message.
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
17-06-2011
Page 115
Display
0.00
Specifications subject to change without notice!