Activating/Deactivating The Clerk System - Olympia CM 940-F Operating And Programming Manual

- Continued -
25. Enter the 2-digit status number
3.
26. Press the ┣CASH┫ key to confirm
the input.
Note:
Saving and concluding clerk programming:
27. Confirm SAVE... by pressing the
┣CASH┫ key.
28. Continue programming for other
clerks or conclude the clerk pro-
gramming process by pressing
the ┣SUB-TOTAL┫ key.
6.7.3

Activating/Deactivating the clerk system

The clerk system is activated/deactivated using system option 3 (status code 2) (see Chapter 6.15).
1. Set the key to PRG
2. Select programme number 13
(see Chapter 6.1.2).
Press the ┣CASH┫ key to confirm
3.
the selection.
Use the digit keys to enter ┣ 3 ┫.
4.
Use the ┣↑┫ and ┣↓┫ keys to
5.
access the input area.
Enter the status code ┣43┫ to acti-
6.
vate the clerk system (while re-
taining the other features in their
default setting).
Or:
Enter the status code ┣47┫ to de-
7.
activate the clerk system.
Press the ┣CASH┫ key to confirm
8.
the input.
9. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
When the cash register is switched on the next time, each clerk must log on to the cash register immediately.
Note:
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
When a feature is
already programmed as
required, you can skip
the programming step.
Input
Page 63 Specifications subject to change without notice!
00 STATUS3
Save...!!
Please Continue...
Display
=P REGISTER
[32] STATUS NO.Mx-My
=P REGISTER
[47] STATUS NO.Mx-My
[43] STATUS NO.Mx-My
or
[47] STATUS NO.Mx-My
Save...!!
Please Continue...
1- 1=
3- 1=