Initiate Programming; Conclude Programming - Olympia CM 940-F Operating And Programming Manual

- Continued -
Displayanzeige - German
46.DALLAS SCHLÜSSEL
47.ECR FUNKTIONS-TYP
48.DEZIMAL PUNKT
49.SPRACHE
50.RUNDUNG PO-RA%
51.RUNDUNG STEUER
52.DATUMS FOMAT
53.RUNDUNG BETRAG
80.SPEICHER LÖSCHEN
81.SD CARD
82.USB STICK
The sequence of subsequent chapters on programming (from Chapter 6.4) basically corresponds to the
Note:
order in the above programming menu.
6.1.2

Initiate programming

Proceed as follows to programme one of the menu options:
1. Set the key to PRG
2. Select the menu option you want to program:
Use the ┣↑┫ and ┣↓┫ keys to scroll to the required item in the menu.
●
Or:
Enter the programme number using the digit keys.
●
Press the ┣CASH┫key to confirm selection.
3.
6.1.3

Conclude programming

Press the ┣SUB-TOTAL┫ key to end programming and skip one menu level back.
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
Display content
in English
46.DALLAS KEYS
47.ECR TYPE
48.DECIMAL POINT
49.LANGUAGE
50.ROUNDING PO-RA%
51.ROUND TAX
52.DATE FORMAT
53.ROUNDING AMOUNT
80.MEMORY CLEAR
81.SD CARD BACKUP
82.USB STICK BACKUP
Page 33
Significance
Programme Dallas keys
Set cash register type
Set number of decimal places
Set language
Programme rounding method
Programme tax rounding method
Programme date format
Programme amount rounding
Delete all data from memory
Produce data backup
Send and receive data via USB flash card
Specifications subject to change without notice!