Defining The Ecr Type; Programming The Ecr Type Using The Pc - Olympia CM 940-F Operating And Programming Manual

6.30

Defining the ECR type

The cash register can operate in different three modes according to the type of business in which it is operated:
ECR type
Hairdresser's version
Baker's version
Restaurant version
The cash register should be operated in its restaurant version.
Example:
1. Set the key to PRG.
2. Select programme number 47
(see Chapter 6.1.2).
Press the ┣CASH┫ key to
3.
confirm the selection.
4. Enter the type number using
the digit keys.
5. Save the programmed data by
pressing the ┣CASH┫ key.
6. Conclude programming by
pressing the ┣SUB-TOTAL┫ key.
6.30.1

Programming the ECR type using the PC

In order to programme the ECR type using the PC programme, OLYMPIA ECR System provides the following input
mask. It is used to programme various parameter settings. They way to use the mask is described in Chapter 5, in detail
in Chapter 5.5.
Fig. 32
Important: *** After data has been transferred to the cash register, the software requires it is switched off briefly! ***
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
Several clerks (users) can be compiled in one bill
Several clerks (users) can operate the cash register simultaneously
Table system can be activated
Feature / Speciality
Input
Page 106 Specifications subject to change without notice!
Type number
0
1
2
Display
=ECR TYPE
[0]
[2 ]
Save...!!
Please Continue...
- 1=