Connecting The Pc To The Cash Register; Using The Pc Programme - Olympia CM 940-F Operating And Programming Manual

- Continued -
7. Do not alter the values already defined.
8. Click on INSTALL.
9. Confirm by clicking on OK.
10. Close the window by clicking on the X at the top right of the window.
5.3

Connecting the PC to the cash register

1. Plug one end of the USB cable in the USB port at the rear of the cash register.
2. Plug the other end of the USB cable in a USB port in your PC.
The hardware wizard appears automatically.
3. Confirm the driver to be installed, as recommended.
4. Wait until the wizard has activated the driver and confirmed it.
5. Click on Finish.
5.4

Using the PC programme

You must now decide:
whether to open one of the pre-programmed sample files as the basis file or
●
whether you want to enter all the data as new.
●
The data CD supplied contains the following three pre-programmed basic programmes:
two basic programmes to operate the cash register as a retail model,
●
one basic programme to operate the cash register as a gastronomy model.
●
Programming the cash register is normally simplified by loading one of the three basic programmes supplied
Tip:
and adapting it accordingly to meet your individual needs. When you have finished programming the
programme, load it on the cash register.
We recommend opening an existing file.
- Continued on next page -
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
Page 25 Specifications subject to change without notice!