Table of Contents
Advertisement
6.14
Programming the machine number
The cash register can be assigned a 4-digit machine number which is then printed on all receipts and reports.
If the machine number is 0000, no number is printed.
Note:
5555 should be programmed as the machine number.
Example:
1.
Set the key to PRG.
2.
Select programme number 12
(see Chapter 6.1.2).
Press the ┣CASH┫ key to confirm
3.
the selection.
4.
Enter the machine number using
the numeric keys.
Press the ┣CASH┫ key to confirm
5.
the input.
6.
Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
6.14.1
Programming the machine number using the PC
In order to programme the machine number (Machine's ID) using the PC programme, OLYMPIA ECR System provides
the following input mask. It is used to programme various parameter settings. They way to use the mask is described in
Chapter 5, in detail in Chapter 5.5.
Fig. 21
Important: *** After data has been transferred to the cash register, the software requires it is switched off briefly! ***
Olympia
2011
Cash Register CM 940-F / 941-F / 942-F
Page 73
Input
=MACHINE NUMBER
[0000 ]
[5555]
Save...!!
Please Continue...
Specifications subject to change without notice!
Display
- 1=
Hide quick links:
Advertisement
Table of Contents
