Programming Dallas Keys - Olympia CM 940-F Operating And Programming Manual

6.29

Programming Dallas keys

Dallas keys are so called unicums which operate using a 12-character code. There is only one copy of each Dallas key. In
this way, Dallas keys simultaneously offer a great deal of security and ease of operation.
To install the Dallas lock, see Chapter 14.6.
Note:
A Dallas key should be programmed for clerk no. 2.
Example:
1. Set the key to PRG.
2. Select programme number 46
(see Chapter 6.1.2).
Press the ┣CASH┫ key to con-
3.
firm the selection.
Press the ┣CASH┫ key to move
4.
to the Dallas key memory
location (1 to 16).
Use the ┣↑┫ and ┣↓┫ keys to
5.
move to the [FFFFFFFFFFFF]
input area.
6. Hold the Dallas key on the
Dallas lock.
Press the ┣CASH┫ key to
7.
confirm the input.
The 12-character code is read in
(e.g.: A1B2C3D4E5F6).
8. Conclude programming by
pressing the ┣SUB-TOTAL┫ key.
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
Page 105
Input
Specifications subject to change without notice!
Display
DALLAS KEY
[ 1] CLERK NO.
DALLASCODE:
[FFFFFFFFFFFF
DALLAS KEY
[ 2] CLERK NO.
DALLASCODE:
[FFFFFFFFFFFF
[FFFFFFFFFFFF
[A1B2C3D4E5F6
1- 1
]
2- 1
]
]
]