Programming An Amount-Related Discount; Programming An Amount-Related Discount (-) Using The Pc - Olympia CM 940-F Operating And Programming Manual

6.10

Programming an amount-related discount (-)

This function programs a fixed amount for the discount.
When the cash register is in its default setting, the key for the fixed amount discount is not set-up on the
Note:
keyboard. The way in which to reprogram the keyboard is described in Chapter 6.28.
A fixed discount of € 1.- must be programmed.
Example:
1. Set the key to PRG
2. Select programme number 09
(see Chapter 6.1.2).
Press the ┣CASH┫ key to confirm
3.
the selection.
Use the ┣↑┫ and ┣↓┫ keys to
4.
move to the [ ] DISCOUNT-
input area.
5. Use the digit keys to enter the
amount of the discount (with
decimal point and decimal
places).
Press the ┣CASH┫ key to confirm
6.
the input.
7. Conclude programming by press-
ing the ┣SUB-TOTAL┫ key.
6.10.1

Programming an amount-related discount (-) using the PC

See Chapter 6.9.1.
Olympia 2011
Cash Register CM 940-F / 941-F / 942-F
Page 69
Input
=Key +/-
[
[
[
[
Save...!!
Please Continue...
Specifications subject to change without notice!
Display
1=
0.00] ADD ON+
0.00] DISCOUNT-
0.00] DISCOUNT-
1.00] DISCOUNT-