Table of Contents
Advertisement
6.16
Programming the machine number
The cash register can be assigned a 4-digit machine number which is then printed on all receipts and reports.
Note:
If the machine number is set to 0000, no number is printed.
Example:
5555 should be programmed as the machine number.
1.
Set the key to PRG.
2.
Select programming number 12
(see Chapter 6.1.2).
Press the ┣CASH┫ key to confirm the
3.
input.
4.
Enter the machine number using the
numeric keys.
Press the ┣CASH┫ key to confirm the
5.
input.
6.
Conclude programming by pressing
the ┣SUB-TOTAL┫ key.
6.16.1
Programming the machine number using the PC
In order to programme the machine number using the PC programme, OLYMPIA ECR System provides the following
input mask. It is used to programme various parameter settings. The way to use the mask is described in Chapter 5, in
detail in Chapter 5.5.
Fig. 21
Important: *** After data has been transferred, the software requires the cash register is switched off briefly! ***
Olympia
2012
Cash Register CM 980-SF / 980-F / 960-SF / 962-SF
Input
Page 80
Display
=MACHINE NUMBER
[0000 ]
[5555]
Save...!!
Please Continue...
All Rights Reserved!
- 1=
Advertisement
Table of Contents
