[Cm17] Ucd Group - NEC NEAX 2000 IVS Command Manual

CM17
COMMAND CODE
17
MAT
1. FUNCTION:
This command is used to define ACD (Automatic Call Distribution) / UCD (Uniform Call Distribution)
groups.
2. PRECAUTION:
(1) A maximum of 16 ACD / UCD groups can be assigned per system.
(2) A maximum of 60 stations can be assigned to an ACD / UCD group.
(3) Prior to changing or deleting the station number within an ACD / UCD Group, in Y=0, it is neces-
sary to change the data for Y=1–7 to the initial data.
(4) This command is included in MAT mode menu "A5" (UCD Group [COM01]).
3. ASSIGNMENT PROCEDURE:
ST + 17Y + DE +
4. DATA TABLE:
Y
No. MEANING
0 Assignment of the sta-
tion numbers to be in-
cluded in the ACD/
UCD Group (Refer to
Note 1 and Note 2)
Note 1: Station numbers should be individually assigned to an ACD / UCD Group, as shown below.
1st operation
2nd operation
Last operation
(STN 1–STN n: Station Numbers included in an ACD / UCD Group)
Note 2: After data setting, lift the handset once, to activate the ACD / UCD function, at each ACD / UCD station.
CHAPTER 3
Page 116
Revision 2.0
[CM17] UCD Group
TITLE:
UCD GROUP
STATION NUMBER (A)
(1-4 digits)
STATION NUMBER (A)
DATA MEANING
X Station Number (A)
XXXX
STATION No. (A)
STN 1
STN 2
STN n
ND-45669 (E)
DATA
+ DE +
(1-4 digits)
SETTING DATA
DATA MEANING
X Station Number (B)
XXXX
STATION No. (B)
STN 2
STN 3
STN 1
+ EXE
Initial Data
:
RELATED
COMMAND