NEC NEAX 2000 IVS Command Manual page 229

CM41
COMMAND CODE
41
FUNCTION
Y PURPOSE
NUMBER
3 12 Ground Start
(Return Ground)
Detect Timing for
DTI Trunk
Note 1: When timer data 99 is assigned by the function number 05, the recall is not performed.
Note 2: When timer data 99 is assigned by the function number 06, the recall is not performed.
Note 3: For initial data, the timing start is not effective.
Note 4: With this timing, the tandem connection is released, unless the incoming trunk does not receive
the release signal.
Note 5: Voice Message Waiting Service-Individual All Clear clears messages exceeding the term.
Note 6: This data is effective only when CM08-086 is set to 0.
Note 7: This data is effective only when CM08-085 and 086 are set to 0.
Note 8: When Immediate Ringing is not provided on Main PBX, be sure to set this data as 00.
Note 9: If CM35 YY=09 is set to "03", "04", "05" or "06", use CM41 Y=3, Functions "00" to "03".
If CM35 YY=09 is set to "01" or "15", use CM41 Y=3, Functions "04" to "12".
CHAPTER 3
Page 196
Revision 2.0
TITLE:
SYSTEM TIMER DATA
INITIAL
DATA
01
7
(sec.)
1
Note 9
ND-45669 (E)
TIMER DATA
TIME
02 03 ...................................................
2 3 ...................................................
INCREMENT
UNIT
15
1 sec.
15