[Cmd101] System Data All Clear - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
D101
1. FUNCTION:
This command is used to delete all the System Data for Billing and for assigning the initial data.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
ST + D101 +
Note: Before clearing the system data by this command, make the following switch setting on the PN-AP00 card.
SW1
4
3
2
1
ON

[CMD101] System Data All Clear

TITLE:
SYSTEM DATA ALL CLEAR
DE + 0000 + DE +
: Position to be set
ND-45669 (E)
CCC + EXE
CMD101
AP OFF LINE
CHAPTER 3
Page 409
Revision 2.0