Chapter 2 Information For Data Programming; General; Description Of Cat And Mat; How To Use The Cat - NEC NEAX 2000 IVS Command Manual

CHAPTER 2 INFORMATION FOR DATA PROGRAMMING

1. GENERAL

This chapter provides information on the Customer Administration Terminal (CAT) and Maintenance Admin-
istration Terminal (MAT) which are used as the man-machine interface with the PBX, and various tables used
for indexing the commands by feature.

2. DESCRIPTION OF CAT AND MAT

In the PBX, the CAT or MAT is used for programming.
The CAT is a digital multi-function telephone (Multiline Terminal) which is equipped with function keys, a
dial- pad and LCD (16 characters), and interfaces with the system via the MP card.
The MAT is the personal computer, which interfaces with the system via the MP card. For further details, refer
to the MAT Operation Guide.

2.1 How to Use the CAT

2.1.1

CAT Key Functions

In the CAT mode, each key on the Multiline Terminal is automatically assigned, as shown in
Figure 2-1. The function of each key is shown in
INFORMATION FOR DATA PROGRAMMING
Table 2-1 and
ND-45669 (E)
Table 2-2.
CHAPTER 2
Page 3
Revision 2.0