NEC NEAX 2000 IVS Command Manual page 24

(2) Example of Operating Steps for Correcting the Data Entry
• In Step 5 in Table 2-3, when
STEP 4.
STEP 1 CM10 has been entered and
STEP 2 "0001" has been entered instead of "0000" as intended.
STEP 3 "0001" has been assigned as first data after pressing
STEP 4 If
CE
STEP 5 Enter "0000".
STEP 6 Press
DE
• If, in Step 11 in Table 2-3, when "302" has been entered instead of "301", press
position of "2".
STEP 1 In Step 11, enter "302" instead of "301" as intended.
←
STEP 2 Press
STEP 3 Press digit Key "1".
0000 is to be deleted after completing all the operations in
(3) Example of Deleting Station Number "300" assigned to LEN000
STEP 1 Press
ST
STEP 2 Enter "10" (Command Number).
STEP 3 Press
DE
STEP 4 Enter LEN "0000".
STEP 5 Press
DE
STEP 6 Enter "CCC".
STEP 7 Press
EXE
STEP 8 Press
DE
is pressed after entering "0001" by mistake, press
DE
DE
is pressed, the state returns to that of Step 1.
, and assign the correct first data.
.
.
.
.
.
.
INFORMATION FOR DATA PROGRAMMING
has been pressed.
.
DE
Table 2-3.
ND-45669 (E)
. Then the state returns to
CE
10> _
10> 0001_
10> 0001: NONE-__
10> _
10> 0000_
10> 0000: NONE__
←
. Then the cursor moves to the
10> 0001: NONE-302
10> 0001: NONE-30__
10> 0001: NONE-301__
COMMAND = _
COMMAND = 10 _
10> _
10> 0000
10> 0000: 300-
10> 0000: 300-CCC
OK
10> 0000: NONE
CHAPTER 2
Page 9
Revision 2.0