Table 4-2 Station Number, Trunk Number, Card Number - NEC NEAX 2000 IVS Command Manual

• Station Number, Trunk Number, Card Number (CM10)
The following data is assigned according to the sequential slot location number of the associated circuit
cards.
CARD PURPOSE
PN-4LC Single Line Telephone
PN-4DLC Multiline Terminal
PN-2DLCB
PN-2DLCC SN610 ATTCON
PN-4COT Trunk
PN-2COT
PN-2ODT
PN-8RST DTMF Receiver
PN-2DAT Digital Announcement
Trunk
PN-CP03 DTMF Receiver
Note: If the DSS Console is not connected to the system, though the PN-4DLC card is mounted in the slot, the
data (F200-F455) for Multiline Terminal is assigned.

Table 4-2 Station Number, Trunk Number, Card Number

ASSIGNED DATA
200 – 455
F200 – F455
E004 – E007
D000 – D255
E200 – E203 (PIM0/1)
E204 – E207 (PIM2/3)
EB000 – EB031
(PIM0/1)
EB032 – EB063
(PIM2/3)
E200 – E203
ND-45669 (E)
RESIDENT SYSTEM PROGRAM
REMARKS
Station Numbers 200 through 455 for Single Line
Telephone and Multiline Terminal are assigned
according to sequential slot location number of
associated circuit card.
SN610 ATTCON Numbers E004 through E007
are assigned according to sequential slot location
number of associated circuit card.
Consecutive card number beginning at 00 is
assigned according to the sequential slot location
number of the associated circuit cards.
CHAPTER 4
Page 413
Revision 2.0