[Cm51] Automatic Transfer Destinations - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
51
1. FUNCTION:
This command is used to define destinations for different types of diversion.
2. PRECAUTION:
If a transferred station number for a house phone call and a transferred station number for off-hook
alarm are the same, this service is not effective.
3. ASSIGNMENT PROCEDURE:
ST + 51YY + DE + NUMBER + DE +
4. DATA TABLE:
YY
No.
00 00 Tenant 00
63 Tenant 63
01 00 Tenant 00
63 Tenant 63
03 00 Tenant 00
63 Tenant 63
04 00 Tenant 00
63 Tenant 63
06 00 Tenant 00
63 Tenant 63
07 00 Tenant 00
63 Tenant 63
08 00 Tenant 00
63 Tenant 63
[CM51] Automatic Transfer Destinations
TITLE:
AUTOMATIC TRANSFER DESTINATIONS
GROUP
(2 digits)
GROUP NUMBER
MEANING
For DID line, transfer destination of incoming
call when the station does not answer the call
within a predetermined time.
For Tie line, transfer destination of incoming call
when the station does not answer the call within
a predetermined time.
For DID line, transfer destination of incoming
call when the station is busy.
For Tie line, transfer destination of incoming call
when the station is busy.
For DID line, transfer destination of incoming
call when the station number is not assigned.
(When CM 08-032 is 1)
For Tie line, transfer destination of incoming call
when the station number is not assigned. (When
CM 08-032 is 1) (See CM49 YY=00, 06, 07)
For station-to-station call, transfer destination of
the call when the station number is not assigned.
ND-45669 (E)
DATA
+ EXE
(1 - 4 digits
DATA
X
XXXX
or
E000
or
EBXXX
E000
or
EBXXX
CM51
SETTING DATA
MEANING
When a station is des-
ignated as the destina-
tion, the setting data is
as follows:
X – XXXX
When an ATTCON is
designated as the des-
tination, the setting
data is as follows:
E000
In case a Digital An-
nouncement Trunk is
designated as the des-
tination in YY = 00,
01, 03, 04, 06, 07, 08,
set the data to
"EBXXX
(000 – 127)".
CHAPTER 3
Page 219
Revision 2.0