NEC NEAX 2000 IVS Command Manual page 402

COMMAND CODE
EA
MAT
3
: System Initialization related information
The address of the program which caused system initialization. Note that, when the program which
caused initialization is lpdi, the receive command (4 bytes from the head) is stored. This informa-
tion is output in the case of system initialization only when the initial kind in 14 is 02, 03, 06, or
0A.
4 : Stack Kind (Lower digit)
0: The number of registrations into H-rank stack was over 16.
1: The number of registrations into L-rank stack was over 48.
5 : Communication Failure Kind (Lower digit)
0: Overflow of the buffer for data sending from MP to FP/AP.
6 : FP/AP Number (Lower digit)
0–3: FP No. 0–3
4–F: AP Card No. 4–15
7
: Power Failure Kind
00: AC input failure
01: Fuse break
02: PWR alarm
8 : Power Failure Restoration Kind
00: Restoration from AC input failure
01: Restoration from fuse break
02: Restoration from PWR alarm
9
: Fault Kind Detail (Lower digit)
0: PCM Loss
1: Frame loss
2: Multiframe loss
3: Not used
4: Remote alarm
5: Not used
6: S-bit error
7: Not used
8: CRC error
9: Slip detected
TITLE:
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
ND-45669 (E)
CMEA
CHAPTER 3
Page 359
Revision 2.0