[Cmf8] Special Commands - NEC NEAX 2000 IVS Command Manual

CMF8
COMMAND CODE
F8
1. FUNCTION:
This command is used to assign the ID code to protect a copy of the Key FD.
2. PRECAUTION:
This command requires a system reset after data setting.
3. ASSIGNMENT PROCEDURE:
ST
+ F8Y +
4. DATA TABLE:
YY
No. MEANING
0 Display of Serial
Number
3 ID Code for Key FD
Note 1: The ID code received from the Interactive Voice Response (IVR) unit must be entered.
Note 2: The Special ID Code can be entered when the ID code is not provided due to trouble with the IVR
unit. The Special ID code is effective for 3 days (4320 minutes). If the exact ID code is not entered
within 3 days of entering the Special ID Code, you will be restricted for MAT/CAT operation.
CHAPTER 3
Page 368
Revision 2.0
[CMF8] Special Commands
TITLE:
SPECIAL COMMANDS
1ST DATA
DE
+ +
(1 digit)
1ST DATA
DATA
0 Serial # C (for PN-CP00)
1 Serial # A (for Key FD #2)
2 Serial # B (for Key FD #1)
0 ID Code Entry/Display of ID Code
1 Display of remaining time for Special
ID Code
Special ID Code Entry
2 Display of Validity/Invalidity for
entered ID Code
2ND DATA
DE
+ +
(1-10 digits)
MEANING
Note 1
Note 2
ND-45669 (E)
EXE
2ND DATA
DATA MEANING
X .... X Serial Number
(Max. 14 digits)
X:ASCII Code
(20H-7DH)
X .... X ID Code (10 digits)
X=0-9
CCC: Cancel
0000 0 – 4320 minutes
4320
0 – 4320 minutes
0 Valid ID Code
1 Invalid ID Code