NEC NEAX 2000 IVS Command Manual page 125

CM12
COMMAND CODE
12
MAT
YY
No. MEANING
16 Trunk to be seized as a
(PVTRK) Private Line on a per sta-
tion basis
Combination of the main
station and sub station
for Number Sharing
17 Kind of Multiline Termi-
nal accommodated in
DLC Card
Note 2, Note 3
22 Multiline Terminal Soft
Keys
23 Multiline Terminal Soft
Key Pattern Number
Note 1: This command setting is required when Designation of FAX Station CM51 YY=14 is utilized.
Note 2: For PN-4DLCD or 4DLCA cards, this data must be assigned to first LEN (Level 0) of each 4-port DLC
card.
For PN-8DLCJ cards, this data must be assigned to first (Level 0) and fifth (Level 4) LENS of each 8-port
card.
term
For D II (4-wire DLCs), this data is not required.
Note 3: This data must be assigned in the following conditions:
• When accommodating Elite
• When accommodating Series E with Series III mode
Note 4: This assignment is only effective when CM12 YY=17 is set to Series E mode "3".
Note 5: Assign the data as follows:
1st data: Main station (D
2nd data: Sub station (PS)
1st data: Sub station (PS)
2nd data: Main station (D
Note 6: As the main station number, D
As the sub station number, the station number assigned to the LC that connects to the Wireless system,
must be assigned.
CHAPTER 3
Page 102
Revision 2.2
TITLE:
STATION CLASS-1
DATA
D000
D255
X
XXXX
0
1
3
INITIAL
0
Note 4 1
0
1
2
3
term
Primary Extension)
term
Primary Extension)
term
Primary Extension number must be assigned.
ND-45669 (E)
Addendum-002
JANUARY, 1999
SETTING DATA
Trunk Number
Related Commands: CM35 YY=98, CM42-08
Main Station Number/Sub Station Number
Series III mode
Elite mode
Series E mode
Available
Not available
Pattern Number 0
Pattern Number 1
Pattern Number 2
Pattern Number 3
: Initial Data
MEANING
Note 5, Note 6