NEC NEAX 2000 IVS Command Manual page 414

COMMAND CODE
D000
DATA
138 MCI/Printer for No. 3 Port
Note: No. 3 port on the PN-AP00 card can be only connected
to the VMS or printer which the RTS signal from the PN-
AP00 card is not needed.
140 Send a Violation Code Message when PBX receives an illegal
message from PMS
141 Send Violation Code message when PBX receives an undefined
FTC message from PMS
142 Send Violation Code message when PBX receives an undefined
FC message from PMS
143 Send ANI to SMDR
150 Specify system to not print Maid Status Record.
176 Designation of Call Charge
208 Check In/Check Out time is printed in the call charge print by
checkout operation.
209 Room Status is printed in the call charge print by checkout opera-
tion.
238 Display of year
TITLE:
SYSTEM FEATURES (1)
1ST DATA
FUNCTION
ND-45669 (E)
Addendum-001
AUGUST, 1998
2ND DATA
0 : Not provided
1 : To provide
0 : Not sent
1 : To send
0 : Not sent
1 : To send
0 : Not sent
1 : To send
0 : Not sent
Note: In this case, ANI is not sent to
SMDR, but area code for calling
party, area code for called party;
authorization code is sent to the
SMDR.
1 : To send
0 : Not available
1 : Available
0 : Call charge by PN-AP00
1 : Call charge by Advice of Charge
(AOC) from ISDN network
0
: Not available
1 : Available
0 : Not available
1 : Available
0 : Not displayed
1 : To display
CMD000
Initial Data
:
CHAPTER 3
Page 371
Revision 2.1