NEC NEAX 2000 IVS Command Manual page 388

COMMAND CODE
TITLE:
CALLING NUMBER DEVELOPMENT DATA
DB
Note 1: If assigning the destination station number as below, the Terminating System overrrides CM30
YY=02/03 for the selected Development Table.
****02 : Trunk Line Appearance
****03 : Trunk Line Appearance + TAS
****04 : Direct-in Termination
****09 : Automated Attendant
****11 : ATTCON + Trunk Line Appearance
****13 : TAS
****14 : Termination to ATTCON
****16 : Direct Inward System Access (DISA)
****19 : ATTCON + TAS
****20 : ATTCON + Trunk Line Appearance + TAS
****31 : DID, TIE, and any call which is not handled by the PBX
Note 2: Destination Station number can be LCR access code + outside telephone number.
ND-45669 (E)
CMDB
CHAPTER 3
Page 345
Revision 2.0