[Cmec] Battery Release/Line Status Display - NEC NEAX 2000 IVS Command Manual

COMMAND CODE
EC
1. FUNCTION:
This command is used for maintenance of the PBX. The functions of this command are outlined below:
• Battery release
• Line status display for single line telephone or Multiline Terminal
2. PRECAUTION:
(1) See Line Status Display in the following pages for details on how to read the status information.
(2) Line status display of a single line should not be performed while the single line is in use.
(3) Line status display is not available in off-line.
3. ASSIGNMENT PROCEDURE:
ST + ECY + DE +
4. DATA TABLE:
Y
No. MEANING
0 Battery release
1 Line status display
[See Line Status Dis-
play]
[CMEC] Battery Release/Line Status Display
TITLE:
BATTERY RELEASE/LINE STATUS DISPLAY
1ST DATA
+ DE +
(1 - 4 digits)
1ST DATA
DATA MEANING
00 —
X Single Line Station
Number or Primary
XXXX Extension Number
X = 0 - 9, A(*),B(#)
ND-45669 (E)
2ND DATA
+ EXE
(0/1)
2ND DATA
DATA MEANING
0 Available
1 Not available
—
CMEC
RELATED
COMMAND
—
CHAPTER 3
Page 361
Revision 2.0