[Cm13] Station Class-2 - NEC NEAX 2000 IVS Command Manual

CM13
COMMAND CODE
13
MAT
1. FUNCTION:
The features for each station are to be designated by assigning Station Class-2 for each station number.
2. PRECAUTION:
(1) When assigning Station Class-2 to a Multiline Terminal by this command, enter "X-XXXX (Pri-
mary Extension Number)" of FX-FXXXX, which is assigned by CM10, as the first data.
(2) When a station has been set as an analog data station (YY=07), the following limitations are
applied to that station:
• Periodic Time Indication tone is not given to the line.
• Override by other stations is restricted.
• Camp-on is restricted.
• Ringing interval is fixed to 1 sec. ON-2 sec. OFF.
(3) This command is included in MAT mode menu "A1" (Station number & Class [COM01]).
(4) The data for a Single Line Station Number, Primary Extension Number of a Multiline Terminal,
Virtual-Line Station Number and Data Station Number are in the following table.
STATION
NUMBER
Single line station number
(Assigned by CM10)
Primary Extension num-
ber of Multiline Terminal
(Assigned by CM10)
Virtual-line Station Num-
ber of Multiline Terminal
(Assigned by CM11)
Data Station Number
(Assigned by CM1A)
×: To assign
–: Not assigned
CHAPTER 3
Page 104
Revision 2.0
[CM13] Station Class-2
TITLE:
STATION CLASS-2
YY
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 21 22 28 29 32 33 34 35
× × × × × × × × × × ×
× × × × × × × × ×
× ×
– – – – –
× ×
– – – – –
× × × × × ×
–
× × × × × ×
– –
× × × × × × ×
– – –
– – – – – – –
ND-45669 (E)
×
– – – – –
× × × × × ×
–
×
– – – – – –
× ×
– – – – – – – –