[Cmd031] Room Status Code - NEC NEAX 2000 IVS Command Manual

CMD031
COMMAND CODE
D031
1. FUNCTION:
This command is used to assign the desired functions for each Room Status Code which is dialed from a
guest room or a Front Desk Terminal
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
ST + D031 +
4. DATA TABLE:
1ST DATA (X: ROOM STATUS CODE 1 - 8)
DATA
X00 Room Cutoff set.
X01 Room Cutoff is cancelled.
X02 Do Not Disturb is set.
X03 Do not Disturb cancelled.
X04 Wake Up Call is cancelled.
X05 Message Waiting Lamp is off.
X06 Check In Time is set.
X07 Check In time is cleared.
X08 Restriction for Toll Call and International Call is set.
X31 Dialing Room Status Code from guest room is permitted.
X: Room Status Code to be set.
CHAPTER 3
Page 402
Revision 2.0

[CMD031] ROOM STATUS CODE

TITLE:
ROOM STATUS CODE
1ST DATA
DE + +
(3 digits)
FUNCTION
ND-45669 (E)
2ND DATA
DE + +
(0/1)
EXE
2ND DATA
0 : No
1 : Yes
Initial Data
: