[Cm18] Station Hunting Group - NEC NEAX 2000 IVS Command Manual

CM18
COMMAND CODE
18
MAT
1. FUNCTION:
This command is used to assign stations to a Station Hunting Group. There are three hunt types: Pilot
System, Circular System and Switch Back System.
2. PRECAUTION:
(1) When a Station Hunting Group requires a secretary station, it is necessary to assign Y=2.
(2) The maximum number of stations which can be assigned to a Station Hunting Group is 60.
(3) There is no limit to the number of Station Hunting Groups.
(4) An individual station cannot be assigned to more than one Hunting Group.
(5) Only one hunting system (Pilot/Circular/Switch Back) can be assigned to a Hunting Group.
(6) The Station Hunting Group can also be set for data stations.
(7) This command is included in MAT mode menu "A4" (Hunting Group [COM01]).
3. ASSIGNMENT PROCEDURE:
ST + 18Y + DE +
CHAPTER 3
Page 118
Revision 2.0
[CM18] Station Hunting Group
TITLE:
STATION HUNTING GROUP
STATION NUMBER (A)
(1-4 digits)
ND-45669 (E)
DATA
+ DE +
(1-4 digits)
+ EXE