Toshiba TOSVERT VF-MB1 Instruction Manual page 58

3.2.2 How to set the frequency
[Example of  setting procedure]: Setting the frequency by the terminal VIA
Panel operation LED display

MODE


* Pressing the MODE key twice returns the display to standard monitor mode (displaying output frequency).
(1) Setting using the keypad (= or )
: Moves the frequency up
 Example of operating from the panel (=: press in center to save)
Panel operation
 Example of operating from the panel (=: save even if power is off)
Panel operation
-
Displays the output frequency (operation stopped).

(When standard monitor display selection = [output frequency])
Displays the first basic parameter [History ()].
Turn the setting dial, and select "".
Press the center of the setting dial to read the parameter value.

(Standard default: ).
Turn the setting dial to change the parameter value to  (terminal block

VIA).
The parameter value is written. and the parameter value are
displayed alternately several times.
LED display
Displays the output frequency.

(When standard monitor display selection = [output frequency])
Set the output frequency. (The frequency will not be saved if the

power is turned off in this state.)
Save the output frequency.  and the frequency are displayed

alternately.
LED display
Display the output frequency.
(When standard monitor display selection is set as =

[output frequency])
Set the output frequency.

The frequency will be saved even if the power is turned off in this

state.
C-7
Operation
: Moves the frequency down
Operation
Operation
E6581697
3