Traverse Function; Logic Sequence Function - Toshiba TOSVERT VF-MB1 Instruction Manual

f910
f911 Step-out detection time
f912
f913 d-axis inductance
 Refer to section 6.21.2 about setting motor constants.
Note 1: When using an PM motor, consult your Toshiba dealer, since the inverter is not compatible with all
Note 2: The inverter may fail to detect step-out in some cases, because it uses an electrical method to detect

6.35 Traverse function

f980 : Traverse selection
6
f981 : Traverse acceleration time
f982 : Traverse deceleration time
f983 : Traverse step
f984 : Traverse jump step
Refer to "Traverse function Instruction Manual" for details.

6.36 Logic sequence function

a900 to a977 : Logic sequence function

Refer to "Logic sequence function Instruction Manual" for details.
Title Function
Step-out detection current level
q-axis inductance
types of PM motors.
step-out. To avoid detection failures, you are recommended to install a mechanical step-out detector.
Adjustment range
1 - 150 (%)
0.00: No detection
0.01 - 2.55 (s)
0.01-650.0 (mH)
0.01-650.0 (mH)
F-128
E6581697
Default setting
100
0.00
10.00
10.00