Free Notes - Toshiba TOSVERT VF-nC1 Instruction Manual

<Selective communications>
When an operation frequency command is sent from the host computer to No. 3 inverter
Host computer
INV
No.00
"Thrown away": On receipt of data from the host computer, only inverters with
6
*: Use terminal boards to branch cables.
①The host computer sends data to all inverters on the network.
②On receiving the data from the computer, each inverter checks the inverter ID number
contained in it.
③Only the inverter with the specified ID number (No. 3 in this case) decodes the command and
performs the specified operation.
④No. 3 inverter sends the processing results to the host computer, along with its ID number.
⑤Thus, only No. 3 inverter operates in response to the operation frequency command from the
host computer.
6.16.2

Free notes

• Function
This parameter allows you to specify an ID number for each inverter for management and
maintenance purposes.
■Parameter setting
Title
Note: Adjustment range of the above mention can set by the computer on the network.
The operation panel can set to the maximum 9999.
* *
＊
INV INV
No.01 No.02
specified ID numbers perform the specified operation, while all
other inverters throw the data away and move to the ready state for
receiving the next data.
: Free notes
Function
Free notes
～ ～
: Cable route
: Data (host to INV)
: Answer-back data (INV to host)
*
INV
No.03
Adjustment range
0～65535
F-30
E6581090
*
INV INV
No.29 No.30
Default setting
0