Installing High Reliability Tools - Fujitsu PRIMERGY RX300 S2 User Manual

1.2.3 Installing High Reliability Tools

You can install all high reliability tools provided with PRIMERGY by specifying them in "Application
Wizard" when the OS is installed is initiated with ServerStart.
After manual OS installation, high reliability tools can be installed all at once, just as they are installed
during OS installation with ServerStart.
In each case, the following high reliability tools are installed.
High Reliability Tools
RAID Management Tool
ServerView
DSNAP
®
Intel PROSet
Broadcom Advanced Control Suite (BACS)
A: Installed in any case
S: Installed if selected
Linux does not support batch installation with ServerStart.
ServerView must be configured after installation even when the high reliability tools have been
installed at once with ServerStart. Refer to "Chapter 6 High Reliability Tools" ( pg.167).
In case where the operating system has been installed with ServerStart, if a high reliability tool is not
installed or the OS has been manually installed, use a standard installer for each tool. For the installation
procedure using the standard installer, refer to "Chapter 6 High Reliability Tools" ( pg.167)
table: High reliability tool installation
Batch installation with ServerStart
PRIMERGY RX300 S2 User's Guide
A
S
S
A
A
1
21