Power States; Table 3-1 Power States - HP Integrity rx6600 User's & Service Manual

Power States

The server has three power states:
• Standby power
Plug the power cord into the appropriate receptacle on the rear of the chassis; the front panel power
button is not turned on.
• Full power
Full power occurs when you plug the power cord into the appropriate receptacle, and either activate the
power using the iLO 2 MP PC command, or press the power button.
• Off
Unplug the power cords.
Table 3-1 lists the server power states.
Table 3-1 Power States
Power Cable
Power States Plugged into
Standby power Yes
Full power Yes
Off No
NOTE If the power restore feature is set to Always On through the iLO 2 MP PR command, the server
can automatically power on to the full power state.
Chapter 3
Powered On with the iLO 2 MP
Front Panel Power Button
Receptacle
No
Yes
No
PC Command, or
Pressed
Powering Off and Powering On the Server
Power States
AC Voltage DC Voltage
Applied Applied
Yes No
Yes Yes
No No
49