Booting; Table 5-28. Gb Lan B Connector Leds; Table 5-29. Normal Boot Process Led States - HP Integrity rx6600 User's & Service Manual

Troubleshooting

Booting

LAN B Connector LEDs
The 1 Gb LAN B interface provides two LEDs on the LAN bulkhead.
Table 5-28 lists the Gb LAN B connector LEDs.
Table 5-28 Gb LAN B Connector LEDs
LED
Speed (upper left)
Speed (upper left)
Link (upper right)
Link (upper right)
Booting
Table 5-29 shows the normal boot process, as reflected in changes to front panel LED states:
Table 5-29 Normal Boot Process LED States
System
Step
Health
1 Off
2 Off
3 Off
4 Off
5 Off
6 Steady
Green
192
Yellow—the 1000 MHz with ethernet protocol and twisted-pair wiring is
enabled, off—no link
Green—the 100 MHz with ethernet protocol and twisted-pair wiring is
enabled, off—no link
Green—link
Off—No link
Internal External
Health Health
Off Off
Off Off
Off Off
Off Steady
Green
Steady Steady
Green Green
Steady Steady
Green Green
Description
Diagnostic
Power
Panel
Off Off
Steady Off
Amber
Steady Off
Green
Steady Off
Green
Steady Off
Green
Steady Off
Green
Normal Power-Up
Through OS Boot
No ac power to the system.
System is shut down, but
ac power and standby
power is active.
System power rails are on
when Power switch is
toggled.
System power rails are on;
BMC drives External
Health LED.
System is booting
firmware (has passed
BOOT_START in firmware).
System has finished
booting firmware and an
OS is either booting or
running.
Chapter 5