Using The Boot Option Maintenance Menu - HP Integrity rx6600 User's & Service Manual

• Bus width
• Whether the SCSI interface is bootable (driver support)
• Avoid bus resets (secondary cluster server)
• Restore Defaults
Step 8. Use the arrow keys to navigate to the appropriate SCSI parameter.
Step 9. Use the plus (
Step 10. Press to exit the
Esc
Step 11. Move the cursor to the action (cancel, save, or discard) you want to take, and press
one of the following options:
• Cancel the exit to stay on the
• Save the changes you made, then exit the screen.
• Discard the changes you made, then exit the screen.
If you select cancel, you remain in the
interface. You can still change the channel's parameters.
If you select save or discard, you go to the EFI SCSI Setup Utility main menu.
CAUTION
Step 12. Press to exit the main menu and the EFI SCSI Setup Utility.
Esc
Step 13. Select the option for exiting the utility.
Step 14. When prompted, press
Step 15. At the EFI Shell prompt, enter the following command:
Shell> reset
The system starts to reboot. This is required to enable the new SCSI setting.

Using the Boot Option Maintenance Menu

This menu enables you to select console output and input devices as well as various boot options. It contains
the following options:
• "Boot From a File" on page 324
• "Add a Boot Option" on page 325
• "Delete Boot Option(s)" on page 326
• "Change Boot Order" on page 326
• "Manage BootNext Setting" on page 327
Appendix E
) and minus ( ) keys to scroll through the values until the value you want displays.
+ -
Adapter Properties
Adapter Properties
Do not select the <Global Properties> option on the main menu.
to stop the SCSI interface; you are at the EFI Shell prompt.
Enter
screen.
screen for the channel of the SCSI interface.
screen for the channel of the SCSI
Adapter Properties
Using the Boot Option Maintenance Menu
Enter
Utilities
.Select
323