Figure D-16 Controller Board; Table D-6 Controller Board Leds - HP Integrity rx6600 User's & Service Manual

Controller Board Runtime LEDs Figure D-16 shows the controller board.
Figure D-16 Controller Board
NOTE During server power-on, each runtime LED illuminates randomly until POST has finished.
Table D-6 lists controller board LED information.
Table D-6 Controller Board LEDs
LED ID Color
0 Amber
1 Amber
2 Blue
3 Blue
4 Green
5 Blue
Appendix D
LED Name
CR510
Controller Failure LED
CR511
Drive Failure LED
CR512
Activity LED
CR513
Activity LED
CR514
Command Outstanding LED
CR515
Heartbeat LED
LED Interpretation
The controller firmware has detected an error.
A physical drive connected to the controller has
failed. Check the Fault LED on each drive to
determine which drive has failed.
For SAS port 21
For SAS port 1E and SAS port 1I
The controller is working on a command from the
host driver.
This LED blinks every two seconds to indicate the
controller health.
Core I/O Card Utilities
Smart Array P600 Controller
293