Removing A Hot-Swappable Power Supply; Figure 4-7 Removing And Replacing A Hot-Swappable Power Supply - HP Integrity rx6600 User's & Service Manual

Removing a Hot-Swappable Power Supply

To remove a hot-swappable power supply, follow these steps:
Step 1. Move the cable management arm from the rack slide nearest the power supplies just enough to
allow access to the power supplies.
Step 2. Remove the power cord plug from the power supply receptacle.
Step 3. Grasp the handle and push the locking tab down with your thumb to release the power supply from
the socket on the midplane board.
Step 4. Support the power supply with both hands, and pull the power supply out of the server (Figure 4-7).
Figure 4-7 Removing and Replacing a Hot-Swappable Power Supply
Rear Chassis View
Chapter 4
Removing and Replacing a Hot-Swappable Power Supply
P0
Removal and Replacement
P1
67