Online Addition (Ola) - HP Integrity rx6600 User's & Service Manual

Removal and Replacement
Removing and Replacing a Hot-Pluggable PCI/PCI-X Card
Table 4-2 PCI/PCI-X I/O Paths (Continued)
Slot
Slot 2 Dual port Gigabit
LAN (core I/O LAN)
Slot 3 I/O with 266 MHz/
64 bit PCI-X card
Slot 4 I/O with 266 MHz/
64 bit PCI-X card
Slot 5 I/O with 133 MHz/
64 bit PCI-X card
Slot 6 I/O with 133 MHz/
64 bit PCI-X card
Slot 7 I/O with 66 MHz/ 64
bit PCI-X card
(shared with slot 8)
Slot 8 I/O with 66 MHz/ 64
bit PCI-X card
(shared with slot 7)
Slot 9 I/O with 66 MHz/ 64
bit PCI-X card
(shared with slot 10)
Slot 10 I/O with 66 MHz/ 64
bit PCI-X card
(shared with slot 9)
Core I/O board Core I/O iLO 2 MP
Core I/O USB
Core I/O VGA
(optional)

Online Addition (OLA)

IMPORTANT Before installing a PCI/PCI-X card, ensure you install the proper drivers.
To add a PCI/PCI-X card into an empty slot, follow these steps:
Step 1. If rack installed, slide the server completely out from the rack. See "Extending the Server from the
Rack" on page 57.
Step 2. Remove the top cover from the chassis. See "Removing the Top Cover" on page 58.
78
Function Location (as
Associated viewed from rear
with Path
2nd from left
(private)
3rd from left (public)
4th from left (public)
5th from left (public)
6th from left (public)
7th from left (public)
8th from left (public)
9th from left (public)
10th from left
(public; nearest to
core I/O board)
Right-most special
slot (private)
Right-most special
slot (private)
Right-most special
slot (private)
HP-UX
Device
of chassis) Path
0/4/2/*
0/7/1/*
0/3/1/*
0/6/1/*
0/2/1/*
0/5/1/*
0/5/2/*
0/1/1/*
0/1/2/*
0/0/1/*
0/0/2/*
0/0/4/*
EFI Device Path
Acpi(HWP0002,400)/Pci(2|*)
Acpi(HWP0002,700)/Pci(1|*)
Acpi(HWP0002,300)/Pci(1|*)
Acpi(HWP0002,600)/Pci(1|*)
Acpi(HWP0002,200)/Pci(1|*)
Acpi(HWP0002,500)/Pci(1|*)
Acpi(HWP0002,500)/Pci(2|*)
Acpi(HWP0002,100)/Pci(1|*)
Acpi(HWP0002,100)/Pci(2|*)
Acpi(HWP0002,0)/Pci(1|*)
Acpi(HWP0002,0)/Pci(2|*)
Acpi(HWP0002,0)/Pci(4|*)
Chapter 4