HP Integrity rx6600 User's & Service Manual page 257

Advanced Device Properties Screen
The
Advanced Device Properties
To access Advanced Device Properties, press
screen.
Adaptor Properties
You can perform the following actions from Advanced Device Properties:
• To set default values for all items on this screen, press
• To toggle between LUN 0 and All in any LUN field, press + or -.
LUN 0 scans only LUN 0, All scans all LUNs.
Max Devices Specifies the maximum number of devices attached to the adapter for which to install a
pre-OS IO interface.
Max Spin-ups Specifies the maximum number of targets that can be simultaneously spinning up. The IOC
must delay by the time indicated in spin-up delay field before starting spin-up of the next
set of targets. A value of zero in the
value of one.
IO Timeouts Specifies the time which the host uses to timeout I/Os for the following devices with
Non-Removable Media:
• SCSI Device Type 00h - Direct Access
• SCSI Device Type 04h - Write Once
• SCSI Device Type 07h - Optical
• SCSI Device Type 0Eh - Simplified Direct Access
IO Timeouts
(Removable) Specifies the time which the host uses to timeout I/Os for the following devices with
Removable Media:
• SCSI Device Type 00h - Direct Access
Appendix D
screen enables you to view and modify infrequently accessed device settings.
on the Advance Device Properties field from the
Enter
Maximum Target Spinups
HP 8 Internal Port SAS HBA (SAS Controller)
on Restore Defaults.
Enter
field is treated the same as a
Core I/O Card Utilities
Advanced
257