HP Integrity rx6600 User's & Service Manual page 209

Each item in the boot options list references a specific boot device and provides a specific set of boot
options or arguments you use when booting the device.
Step 3. Press to initiate booting using the selected boot option.
Enter
Step 4. Exit the console and iLO 2 MP interfaces when finished using them.
Press
Control+B
To exit the iLO 2 MP, enter X at the main menu.
Booting HP-UX from the EFI Shell
From the EFI Shell environment, to boot HP-UX on a device, follow these steps:
Step 1. Access the EFI Shell environment for the system on which you want to boot HP-UX.
Log in to the iLO 2 MP and enter CO to select the system console.
Confirm that you are at the
the submenus until you return to the
From the
EFI Boot Manager
Step 2. At the EFI Shell environment, issue the map command to list all currently mapped bootable devices.
The bootable file systems you need are typically listed as fs0:, fs1:, and so on.
Step 3. Access the EFI System Partition (fsX: where X is the file system number) for the device from which
you want to boot HP-UX.
For example, enter fs2: to access the EFI System Partition for the bootable file system number 2.
The EFI Shell prompt changes to reflect the file system currently accessed.
The file system number can change each time it is mapped; for example, when the system boots or
when the map -r command is issued.
Step 4. When accessing the EFI System Partition for the desired boot device, issue the HPUX command to
initiate the HPUX.EFI loader on the device you are accessing.
The full path for the loader is \EFI\HPUX\HPUX.EFI. When initiated, the loader references the
\EFI\HPUX\AUTO file and proceeds to boot HP-UX using the default boot behavior specified in the
AUTO file.
You have 10 seconds to interrupt the automatic booting of the default boot behavior. Press any key
during this 10-second period to stop the HP-UX boot process and interact with the HPUX.EFI loader.
To exit the loader (the HPUX> prompt), enter exit to return you to the EFI Shell.
To boot the HP-UX operating system, do not type anything during the 10-second period given for
stopping at the HPUX.EFI loader. For example:
Shell> map
Device mapping table
fs0 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part1,Sig72550000)
blk0 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)
blk1 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part1,Sig72550000)
blk2 : Acpi(000222F0,269)/Pci(0|0)/Scsi(Pun8,Lun0)/HD(Part2,Sig72550000)
blk3 : Acpi(000222F0,2A8)/Pci(0|0)/Scsi(Pun8,Lun0)
blk4 : Acpi(000222F0,2A8)/Pci(0|1)/Scsi(Pun2,Lun0)
Shell> fs0:
Appendix B
to exit the system console and return to the
EFI Boot Manager
EFI Boot Manager
menu, select
Booting and Shutting Down the Operating System
MP Main Menu
menu. If you are at another EFI menu, select
screen.
to access the EFI Shell environment.
EFI Shell
Booting and Shutting Down HP-UX
.
Exit
from
209