Figure D-1. Accessed Screens In The Drvcfg Utility - HP Integrity rx6600 User's & Service Manual

Core I/O Card Utilities
HP 8 Internal Port SAS HBA (SAS Controller)
Configuration Utility Screens
All SAS BIOS configuration utility screens contain the following areas, starting at the top of the screen:
Header area Identifies the utility and version number.
Menu area Gives the title of the current screen, and on screens other than the
identifies the adapter.
Main area The main area for presenting data. This area has a cursor for item selection, and horizontal
and vertical scroll bars if necessary.
Footer area Provides general help information text.
Figure D-1 provides a map of how screens are accessed in the DRVCFG utility.
Figure D-1 Accessed Screens in the DRVCFG Utility
DRVCFG Screens
Adapter List Screen
The screen displays when the configuration utility is first started. This screen displays a scrolling
Adapter List
list of up to 256 SAS controllers in the system, and information about each of them. Use the arrow keys to
select a SAS controller, and press
You can view and modify the SAS controller whether it is enabled or disabled. You can use the
setting in the
Adapter Properties
in order for a new
Boot Support
The following are the descriptions for the
Adapter Indicates the specific SAS Controller type.
PCI Bus Indicates the PCI Bus number assigned by the system BIOS to an adapter (0x00 - 0xFF, 0 -
255 decimal)
PCI Dev Indicates the PCI Device assigned by the system BIOS to an adapter (range 0x00 - 0x1F, 0 -
31 decimal)
PCI Fnc Indicates the PCI Function assigned by the system BIOS to an adapter (range 0x00 - 0x7, 0
- 7 decimal)
246
to view and modify the selected SAS controller's properties.
Enter
menu to change the status of this setting. You must reconnect the EFI Driver
setting to take effect.
screen.
Adapter List
screen also
Adapter List
Boot Support
Appendix D