ORCA Utility
To use ORCA, follow these steps:
Step 1. Power on the server. POST runs, and any array controllers that are in the server are initialized one
at a time. During each controller initialization process, POST halts for several seconds while an
ORCA prompt message displays.
Step 2. At the ORCA prompt:
•
If you are connected using a headless console, press the
•
Otherwise, press
logical drive.
Figure D-10 ORCA Main Menu
Creating a Logical Drive Using ORCA
To create a logical drive using ORCA, follow these steps:
Step 1. Select
Create Logical Drive
and the valid RAID options for the system.
Step 2. Use the
Arrow
including an online spare drive if one is required.
NOTE
Step 3. Press
to accept the settings.
Enter
Appendix D
. The
F8
ORCA Main Menu
. The screen displays a list of all available (unconfigured) physical drives
keys,
, and
Spacebar
Tab
You cannot use ORCA to configure one spare drive to be shared among several arrays.
Only ACU enables you to configure shared spare drives.
Esc+8
displays, enabling you to create, view, or delete a
to navigate around the screen and set up the logical drive,
Core I/O Card Utilities
Smart Array P600 Controller
combination.
279