HP Integrity rx6600 User's & Service Manual page 319

• Vendor ID: Shows the device vendor ID. This is the same for both channels. For all SCSI
interfaces, the ID is 0x1000.
• Device ID: Shows the device ID. This is the same for both channels. In this example, the SCSI
interface the ID is 0x0030.
• Slot #: Identifies the physical card slot in the system where the SCSI interface is installed.
This is the same for both channels. In this example, the SCSI interface is on the system board,
therefore the slot number is xx.
• Path: Identifies the device path. In this example, the SCSI interface path is
Acpi(HWP0002,200)/Pci(1|0) for channel A and Acpi(HWP0002,200)/Pci(1|1) for channel
B.
Using the SCSI interface information from this example, the combined information that tells you
this is a SCSI interface are the following (shown in bold, for highlighting purposes):
00 20 01
00 20 01
The vendor (0x1000) and device (0x0030) are the IDs for a SCSI interface. Of the devices with
those IDs, this device has two channels (Fnc # of 00 followed by Fnc # of 01). Also, this SCSI
interface has a non-numeric (XX) slot # indicating that it is on the system board.
Step 2. From the EFI Shell prompt, enter the following command to obtain the controller's handle for the
SCSI interface:
Shell> devtree
A tree of all EFI-capable devices installed in the system displays. For example:
Shell> devtree
Device Tree
Ctrl[04]
Ctrl[0A] Acpi(HWP0002,0)
Ctrl[12] Usb Open Host Controller
Ctrl[13] Usb Open Host Controller
Ctrl[14] Acpi(HWP0002,0)/Pci(1|2)
Ctrl[15] PCI IDE/ATAPI Controller
Ctrl[48] DW-28E
Ctrl[83] FAT File System [FAT32] 118 MB
Ctrl[16] Acpi(HWP0002,0)/Pci(3|0)
Ctrl[49] Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E4C4F1A)
Ctrl[0B] Acpi(HWP0002,100)
Ctrl[17] LSI Logic Ultra320 SCSI Controller
Ctrl[18] LSI Logic Ultra320 SCSI Controller
Ctrl[19] Acpi(HWP0002,100)/Pci(2|0)
Appendix E
00 0x1000 0x0030 xx
01 0x1000 0x0030 xx
Acpi(HWP0002,200)/Pci(1|0)
Acpi(HWP0002,200)/Pci(1|1)
Utilities
Specifying SCSI Parameters
319