Server Blade Power States - HP Integrity BL860c i2 User's & Service Manual

3. Install the server blade.
The server blade should come up to standby power. The server blade is at standby power if the
blade power LED is amber.

Server blade power states

The server blade has three power states: standby power, full power, and off. Install the server
blade into the enclosure to achieve the standby power state. Server blades are set to power on to
standby power when installed in a server blade enclosure. Verify the power state by viewing the
LEDs on the front panel, and using Table 5.
For more front panel LED information, see "Front panel LEDs" (page 93).
Installing and powering on the server blade 21