Setting The Serial Number - Konica Minolta 7020 Service Manual

HOME
[8]

Setting the Serial Number

This function is used to display, set and change the serial
number of the main body and optional units.
The serial numbers can be read from KRDS.
1. Serial number display procedure
Select [7. Serial number] in the 25 mode screen. The
serial number setting screen will appear.
The item name and serial number are displayed on
the serial number setting menu screen. Each serial
number is displayed at the right side of each unit.
You can set the destination (for FAX) of the machine
by pressing the [Destination setting] key.
Press the [RETURN] key to end setting and return to
the 25 mode menu screen.
2. Setting and changing serial number
On the serial number setting screen, select the
desired item, then each serial number setting screen
will appear.
Step
1 Enter the 25 mode.
2 [25 mode menu screen]
Press the [7. Serial number] key.
3 [Serial number setting menu screen]
Press the key corresponding to the desired item
on the screen.
4 [Serial number setting screen]
Enter the 9-digit serial number from the alphabet
and numeric keys on the screen and then press
the [SET] key to enter the number that has been
entered.
5 Press the [RETURN] key to return to the serial
number setting menu screen.
6 When changing the serial number of other item,
repeat steps 3 to 5.
7 Press the [RETURN] key to return to the 25
mode menu screen.
Note:
Operation procedure
When pressing the [RETURN] key without
pressing the [SET] key, the setting is
complete. However the new serial number
will not be entered and the serial number
setting menu screen will return.
3. Changing the destination setting (for FAX
option)
To change the destination setting, press the
"Destination" key on the serial-number setup menu.
The procedure is as follows.
Step Operation procedure
1 Enter the 25 mode.
2 [25 mode menu screen]
Press the [7. Serial No.] key.
3 [Serial number setting screen]
Press the [Destination] key.
4 [Destination setting screen]
Use the [ ] or [ ] key to select the destination.
5 Press the [OK] key to register the setting and to
return to the serial number setting screen.
6 Press the [RETURN] key to return to the 25
mode menu screen.
Note: If you press [CANCEL] key, the copier will
2
retain the previous destination setting and
return you to the serial number setting
screen.
<Destination codes>
Code Destination
JP Japan
CA Canada
US U.S.A
KR Korea
SG Singapore
2
MY Malaysia
CN China
SA Saudi Arabia
TW Taiwan
ZA South Africa
PL Poland
PT Portugal
ES Spain
IT Italy
DK Denmark
4-33
25
ADJUSTMENT
Code Destination
IE Ireland
FI Finland
SE Sweden
NO Norway
AT Austria
BE Belgium
NL Netherlands
CH Switzerland
FR France
GB Great Britain
DE German
EU Europe
NZ New Zealand
AU Australia