HOME
36 MODE
List of adjustment items for 36 mode
No.
Menu
1
High voltage adjustment
2
Timing adjustment
No.
Sub menu
Circular menu
—
None
Charging voltage adjustment
Transfer current adjustment
Separation (AC) voltage adjustment
Separation (DC) current adjustment
Charging grid voltage adjustment
Developing bias adjustment
L detection adjustment
Automatic toner supply
1
Vertical/Horizontal
Printer vertical magnification (drum clock)
magnification
adjustment
adjustment
Printer 2 vertical magnification (drum clock)
adjustment (Other than 7020/25/30)
Platen vertical magnification (drum clock)
adjustment
Platen horizontal magnification adjustment
RADF (50% single side) vertical
magnification (drum clock) adjustment
RADF (100% single side) vertical magnification
(drum clock) adjustment
RADF (200% single side) vertical magnification
(drum clock) adjustment
RADF (400% single side) vertical magnification
(drum clock) adjustment
RADF (50% double side) vertical magnification
(drum clock) adjustment
RADF (100% double side) vertical magnification
(drum clock) adjustment
RADF (200% double side) vertical magnification
(drum clock) adjustment
RADF (400% double side) vertical
magnification (drum clock) adjustment
2
Restart timing
Restart timing adjustment (All)
adjustment
Restart timing adjustment (Main body upper tray)
Restart timing adjustment (Main body lower tray)
Restart timing adjustment (DB upper tray)
Restart timing adjustment (DB lower tray)
Restart timing adjustment (By-pass)
Restart timing adjustment (ADU)
Summary of operation
Adjustment in the field is inhibited.
Performs L detection adjustment for the developer,
and registers the result in the nonvolatile memory.
Display the L detection adjustment value as the result
when it is completed. Reset the developing counter.
Adjustment in the field is inhibited.
The method of adjusting the 7020/25/30
4
differs from that of the 7022/7130/7035/7135.
After adjustment, print the SGU pattern (No.16).
After making an adjustment, make a copy.
The same as 36 mode 9 RADF Adjustment.
After making an adjustment, print the SGU
pattern (No.16).
4-35
36
ADJUSTMENT